How To Remove Hot Sauce Stain From Granite

Granite can exist more than delicate than many synthetic countertops and will sometimes require repair. This page will walk you through how to tell the difference between etching and staining, what to practise if your granite has a stain and how to enhance the color of your granite.

Identifying Etches and Stains

These are two common bug with granite which are dislocated with each other. In order to fix either staining or carving you should first place which problem your granite has.

Etching is a reaction to an acidic or alkaline substances on the surface of the stone. Staining occurs when a substance is absorbed into the pores of the rock. Stains are always darker in appearance than etches.

If you have light carving you'll need to purchase polishing pulverisation or if y'all accept deep etching you will demand to contact a stone restoration company. For stains, purchase the advisable Stone Intendance International Stain Remover and follow the instructions below.

Please note that water may temporarily darken the stone, only it will evaporate. However, if water darkens on the surface and so this is the time to re-seal (after removing the entire stain).

Removing Stains from Granite

If granite has a stain it means a substance is absorbed into the pores of granite and will require a poultice, similar the ones offered by Stone Care International, to remove it. Poultice are extremely absorbent substances. The poultice enters the pores of the rock and chemically draws the stone into the poultice.

Follow these instructions to remove the stain:

Employ the paste about ¼ inch thick over the stain
Encompass the paste with plastic wrap and tape the edges to agree the plastic wrap in place (practice not encompass the entire area in tape)
Put a few pin-size holes in the plastic wrap to allow air to escape
Allow poultice to dry on the surface until hardened (typically 12-24 hours)
Touch on the paste through the plastic wrap to ensure information technology'southward completely dry out. Push in the middle of the poultice to be certain it's non pulposus, or mashy beneath the hardened superlative layer.
Remove tape and plastic wrap
Gently remove the dried paste with a plastic scraper
Clean the area with Stone Care International Granite & Stone Daily Cleaner and a microfiber cloth

Stained Granite

Use the poultice to the stain

Cover in plastic wrap and poke air holes

After the poultice has stale, scrape away

After the stain is removed

Grease and oil stains respond slowly to whatever treatments and may require several dorsum-to-dorsum applications. Poultice are water based significant you need to overwhelm the oil-based stains in society to blot information technology out of the stone, which requires several applications.